技術參數 Technical Parameters：
紙板箱的質量要求：
1.紙板箱的類型（幾何折疊） ：FEFCO0410
2.紙板裁切尺寸誤差范圍 ：±2mm
3.紙板沖壓的誤差范圍 ：±2mm
4.紙板沖壓/裁切位置公差范圍 ：±2mm
5.角度誤差 ：0.05°（長度與寬度之間的直角度）
6.不同的紙板質量都可能會影響機器性能、加工效率及產量
The quality of the carton requirements:
1. The type of carton (geometric fold) : FEFCO0410
2. Paper cutting size error range: plus or minus 2 mm
3. The cardboard punching error range: plus or minus 2 mm
4. The board stamping/cutting position tolerance range: plus or minus 2 mm
5. The Angle error: the biggest 0.05 ° (straight Angle between length and width)
6. Different quality of cardboard are likely to affect the machineperformance, processing and production efficiency
用途：
1.使用對型號FEFCO0410紙板箱進行封箱
2.2次停止，壓板呈L形布置
3.預先折疊好紙箱底部
4.包裝方向：單邊操作
5.適用于大批量作業及單件生產
USES:
1. Used for model FEFCO0410 carton sealing
2.2 stop, linking piece L arrangement
3. The bottom of the folded cartons in advance
4. Packing direction: unilateral action
5. Applicable to mass work and single production
工作原理：
1.填充完工件的包裝箱進入輸送滾筒后加速，同時箱子垂直豎立的箱蓋被折平，包裝箱靠邊的長端被噴涂上熱熔膠，然后箱子停止，一個移動噴嘴在包裝箱橫向側邊噴上熱熔膠；
2.機器配設壓板從上往下施壓將箱頂兩端折合處壓緊，在一個短時間的壓合之后，包裝箱被輸送至下一個加工站；包裝箱后面的橫向邊也以前面同樣的方式封口；
3.這種帶有箱體寬度識別的封箱方法，在進料過程中，可以根據箱體尺寸的不同規格很好地進行封箱加工；箱子的尺寸無需輸入。
4.在系列操作中，可測量個紙板箱的寬度尺寸，并將該數值應用于整個系列中，也可使用控制系統所給出的紙板箱寬度。
Working principle:
1. After filling the container of finished work into the conveying roller speed, at the same time box lid was erected vertical fold flat,packing to pull over End by spraying on the hot melt adhesive, and then stop box, a move the nozzle on the lateral side spray packing hot melt adhesive;
2. The machine with a platen press down on the roof edges reduced pressure, in a short time after the pressing of packing to be transported To the next processing station; Boxes at the back of the lateral side are in the same way in front of the sealing;
3. This kind of sealing with a box body width recognition method, in the process of feed,can according to the different specifications of size of the well Sealing processing; The size of the box without input.
4. In a series of actions that can measure the width of the first carton size, and is applied to the numerical value of the whole series, can also be used The carton width of system are given.
案例展示：Display case
