技術參數 Technical Parameters：

應用： 

1.用于成形工件和柜體工件等長、寬和高度尺寸測量，并將獲取的尺寸數據經軟件處理后傳輸給“紙箱裁切機”進行相應規格紙箱裁切。

2.測量后的工件通過輥筒輸送將工件輸送到下一個工位。

Application:

1. Used for artifacts and cabinet put oneself in another's position workpiece length, width, and height measurement, and will get the size Data by software processing will be lost to "carton cutting machine" corresponding specification carton cutting.

2. After the measurement of the workpiece through the roller conveyor to transport the next station.

產品特點：

1.自動測量靠板通過傳感器對工件進行長、寬度測量；在工件進入下一個工序時通過高度傳感器進行高度自動測量。

2.輥筒配套環形帶傳動，操作簡單，噪音低；

3.傳送輥筒外包耐磨耐溶劑橡膠，使工件運行平穩；

4.變頻無級調速控制進料速度；

5.采用250X50高強度鋁合金型材橫梁，設備強度更高、整體性更好、更美觀；安裝維護更方便；

6.外觀采用噴塑涂飾，提高了抗污染性，便于設備清潔。

Product features

1. Automatic dynamic measurement sensors on board the workpiece, the measurement of length, width, The artifacts into the next process through the altitude sensor height automatic measurement.

2. The supporting roller ring belt transmission, simple operation, low noise;

3. The transfer roller outsourcing wear-resisting solvent resistant rubber, the smooth operation of components;

4. Frequency conversion stepless speed regulation control of feed speed;

5. 250 x50 high strength aluminum alloy profile is used for beam, higher strength of equipment, the integrity of better and more beautiful; Moreconvenient installation and maintenance;

6. The sprayed coating, improves the stain resistance and easy cleaning equipment

案例展示：Display case